LORA-P
[Knapstein]
Description
The Knapstein LORA-P pendant lamp consists of two rings in the surface matt nickel-plated. One ring has a diameter of 40 cm, the other one 60 cm. Both rings emit their light simultaneously upwards and downwards. The uplight and downlight can be switched and dimmed separately for each ring via gesture control. The sensor area for the gesture control is located at the top or bottom of each ring. A wiping movement in the sensor area switches the light on or off. The light can be dimmed by holding the hand in the sensor area for a longer period.
Each ring of the LORA-P can be adjusted in height separately from the other up to approx. 80 cm. The height is infinitely variable by pulling or pushing a ring. The overall height of the lamp can therefore be adjusted between 70 cm and 170 cm. The Knapstein pendant lamp is also suitable for mounting on sloping ceilings. No screws are visible in the ceiling canopy because the canopy is held in place by magnets. LEDs with a colour temperature of 2,700 Kelvin extra warm white are integrated as light sources in the rings. On request, the LORA is also available in other sizes or surfaces.
Technique
| Country of Manufacture |
 Germany |
|---|---|
| Manufacturer | Knapstein |
| Designer | Knapstein |
| Year of design | 2020 |
| protection | IP20 |
| Scope of delivery | LED |
| voltage suitability | 230 - 240 Volt |
| Diameter in cm | 40 + 60 |
| material | brass |
| surface | nickel |
| height adjustment | height adjustable |
| dimming | gesture control |
| LED | inclusive |
| Colour Rendering Index | >90 |
| Color temperature in Kelvin | 2,700 extra warm white |
| canopy dimensions | ∅ 35 cm |
| bulb exchange | at the manufacturer / at the factory |
| system performance | 1 x 33 + 1 x 50 Watt |
| Total luminous flux in lm | 10,081 |
| total height | 70 - 170 cm |
| Dimensions | Ø 40 + 60 cm |
