Lederam W1 17 Version 4, shade copper-black
[Enzo Catellani]
Description
The Catellani & Smith Lederam W1 17 wall lamp is tiltable and rotatable. It is offered in four versions:
| Version 3: | shade outside: | white | shade inside: | white |
| wall mount: | white | |||
| Version 8: | shade outside: | black | shade inside: | black |
| wall mount: | black | |||
| Version 11: | shade outside: | gold | shade inside: | black |
| wall mount: | black | |||
| Version 12: | shade outside: | copper | shade inside: | black |
| wall mount: | black |
The wall lamp is made of aluminum and metal. The wall bracket is white for version 3, black for all other versions. The lamp shade has a diameter of 17 cm. This shade can also after installation be tilted forward and rotated to the left. This allows the light distribution to be adjusted at any time. Most of the light is emitted to the wall behind the lamp, a part is reflected from there into the room. The integrated LED has an output of 17 watt and a colour temperature of 2,700 Kelvin extra warm white. It can be dimmed by the customer and can be replaced. In addition to the W1 with a shade diameter of 17 cm, a wall lamp with 25 cm is also available from this series.
Technique
| Country of Manufacture |
 Italy |
|---|---|
| Manufacturer | Catellani & Smith |
| Designer | Enzo Catellani |
| Year of design | 2014 |
| protection | IP20 |
| Scope of delivery | LED |
| voltage suitability | 230 - 240 Volt |
| Depth in cm | 8 |
| Diameter in cm | 17 |
| material | aluminum, metal |
| dimming | on site dimmable with a trailing edge dimmer |
| Wattage | 17 W |
| LED | inclusive |
| Colour Rendering Index | >80 |
| Luminous flux in lm | 1,700 |
| Color temperature in Kelvin | 2,700 extra warm white |
| version | 4 |
| bulb exchange | on site itself |
| Wall mount dimensions | ∅ 6 cm |
| Dimensions | Ø 17 cm |
