JULI-S
[Knapstein]
Description
The Knapstein JULI-S floor lamp has a tiltable lamp arm with a projection of 46 cm. In addition, the lamp can be tilted at will by means of a ball joint at the base of the lamp. The floor lamp can be switched and infinitely dimmed via gesture control. The sensor for gesture control is located in the lower area of the plexiglass cover of the LED. The light can be switched on or off with a wiping hand movement. To dim the light, the hand is held below or above the sensor until the desired light intensity is reached. The last light intensity set is saved via the memory function and automatically selected again the next time the light is switched on. In the case of a mains failure, the lamp is automatically switched on if it was previously on. It remains switched off if it was also switched off before the mains failure. This function is suitable for use with switchable sockets.
The JULI-S is available in matt brass, black and matt nickel-plated surfaces. The lamp base has a length of 23 cm and a width of 18 cm. An LED with a colour temperature of 2,700 Kelvin extra warm white is integrated into the lamp arm as a light source.
Technique
| Country of Manufacture |
 Germany |
|---|---|
| Manufacturer | Knapstein |
| Designer | Knapstein |
| protection | IP20 |
| Scope of delivery | LED |
| voltage suitability | 110 - 240 Volt |
| Projection in cm | 46 |
| material | brass |
| dimming | gesture control |
| Wattage | 10.8 W |
| LED | inclusive |
| Colour Rendering Index | >90 |
| Luminous flux in lm | 1,200 |
| Color temperature in Kelvin | 2,700 extra warm white |
| lamp stand dimensions | length 23, width 18 cm |
| Dimensions | H 112 cm |
